Direct
Capillary

Insertion Module

Increase sample reproducibility and accuracy using the Direct Capillary Insertion Module for the new DART SVP.

Apply sample to the end of a standard size melting-point capillary, place it in the module, secure it using our magnetic lock, and start your DART SVP's. Reliable positioning improves operation. Using glass tubes lowers cost per analysis to a few cents.

Pre-programmed methods automatically position your sample in the ionizing gas at the temperature needed for your method or use the "Free Run" mode to manually control the experimental conditions during method development.

The module easily attaches and detaches in seconds, giving you quick and consistent results.